Precision High Speed Lathe LD 360
| Swing | over bed | 360mm |
| over cross slide | 225mm | |
| over gap | 520mm | |
| Distance between centers | 1000mm | |
| Width of bed | 190mm | |
| Numbered of spindle speeds | 9 | |
| Range of spindle speeds | 80-2000 rotations per minute | |
| Hole through spindle | 40mm | |
| Spindlenose | D1-4 Camlock | |
| Taper of spindle bore | M.T. No.5 | |
| Tailstock quill taper | M.T. No.3 | |
| Tailstock quill travel | 110mm | |
| Cross slide travel | 175mm | |
| Compound rest travel | 100mm | |
| Metric threads | (30)0.4-7.0 mm | |
| Inch threads | (32)4-56 tpi | |
| Longitudinal feeds | 0.068-0.936 mm/rev | |
| Cross feeds | 0.034-0.468 mm/rev | |
| Machine net weight | 620 Kg | |
| Gross weight | 720 Kg | |
| Crate dimension lxwxh | 1905 x 762 x 1473 mm |
| Standard accessories: 2HP 1PH 3HP 3PH main drive motor Rapid foor brake 4-ways tool post 6" & 8" Backplate (D1-4) Thread dial Gap bed Centers, M.T. No.3 Denter sleeve, M.T. No.5x3 Set of change gears Tool kit & box Complete electric control unit Dual dials Face plate 10" (250mm) Steady rest Follow rest Rear splash guard 1/8 HP coolant pump |
Optional Accessories: 3-jaw scroll chuck 150mm 4-jaw independent chuck 200mm Quick change tool post Single tool post Taper turning attachment Carriage micro stop Live centers MT#3 Work lamp Drill chuck 13mm w/arbor Chuck guard 4-position carriage stop Milling attachment |